misspelledsearch.com:

tweeters store

information page

If you cannot find the information you are searching for on this page, we suggest searching Google with the correct spelling "tweeters store":

Google

A Sony tweeter.

Contents

  • 1 Overview
  • 2 Types of tweeters
    • 2.1 Cone tweeter
    • 2.2 Dome tweeter
    • 2.3 Piezo tweeter
    • 2.4 Horn tweeter
    • 2.5 Ribbon tweeter
  • 3 See also

Overview

A tweeter is a loudspeaker that produces high frequencies. The range of frequencies is typically from around 2,000 hertz to 22,000 hertz (20,000 Hz is generally considered to be the upper limit of the human ear). Some tweeters can reach upto even 30-35kHz.

Tweeter placement can be critical since the high frequencies are much more directional than the lower frequencies handled by a woofer. This requires the tweeter face to be directed towards the listener.

Types of tweeters

Cone tweeter

Cone tweeters have the same basic form as that of a dynamic speaker driver with optimisations to operate at higher frequencies. The optimisations are as follows:

  • The cone is very light and thin so that it can move rapidly.
  • The suspension (or spider) is less compliant to suppress movement at lower frequencies.
  • The voice coil is made of thin wire to reduce weight and inductance.

Dome tweeter

A dome tweeter is constructed by coupling a light voice coil to a light dome (made of coated cloth, thin metal or other suitable material) which is attached to the magnet or the top-plate with a rigid suspension. This tweeter typically does not have a frame or basket.

Piezo tweeter

A piezo tweeter contains a piezo-electric crystal as the transducer. It operates by the flexing of the crystal in response to the voltage applied across the crystal's surfaces. The flexation is the mechanical analog of the electrical signal impressed upon the crystal and thus the crystal converts electrical energy into mechanical (and hence acoustic) energy. The piezo tweeter does not use magnetism to operate and does not contain a magnet.

Horn tweeter

A horn tweeter is any of the above tweeters coupled to a flare or horn. The horn improves the off-axis response of the tweeter by aiding in greater dispersion (reducing directivity) of the tweeter. It also improves the efficiency of the tweeter by coupling the relatively high acoustic impedance of the driver, to the lower impedance of the air.

Ribbon tweeter

A Philips ribbon tweeter.

A Ribbon Tweeter uses a piece of very thin aluminium foil suspended in a powerful magnetic field to reproduce high frequencies. The development of ribbon tweeters has followed the development of ribbon microphones. High power versions of ribbon tweeters are becoming common in large scale sound reinforcement line array systems, that can serve audiences of thousands. This is because the ribbon tweeter exhibits specific directional properties, with very wide horizontal dispersion (coverage) and very tight vertical dispersion. These properties mean that the devices can be stacked vertically, making a high frequency line array that will project high sound pressure levels much further than conventional tweeters.

Some manufacturers have opted to make wave guides that channel the hemispherical output of a regular tweeter into a more focused beam, approximating a ribbon tweeter. However this approach doesn't yield the same output as a true ribbon, which will almost always have a better high frequency response than a standard tweeter. This is because the entire ribbon is immersed in its magnetic field, whereas a standard dome or cone tweeter has only its voice coil coupled to its magnetic field. This leads to failure of the dome or cone to faithfully track voice coil movement, creating phase distortion called breakup. Ribbons will function at higher frequencies than conventional circular tweeters, without breakup modes (distortion).

See also

  • Loudspeaker
  • Woofer
  • Mid-range speaker
  • Full-range
  • Subwoofer


This electronics-related article is a stub. You can help Wikipedia by expanding it.

This tweeters store index site has been developed to help wayward users find the information they are looking for, no matter how they are mistakenly spelled or mistyped. This site is designed to help users find tweeters store information for the following query variants:

tweeters tweeters sore tweeters stere tweeters stole
tweeters soar tweeters sole tweeters tore tweeters tere
tweeters tole tweeters stre tweeters stor tweeters ster
tweeters stur tweeters stle tweeters stol tweeters stoer
tweeters stroe tweeters sotre tweeters tsore tweeters stoe
store tweator store twetor store twheetor store
twheator store twhetor store teeter store tweeter store
tweeer store tweetr store tweetor store twheeter store
tweatel store twheater store twetel store twheter store
twheetel store tweetur store twheatel store tweatur store
twhetel store twetur store twheetur store twheatur store
tweater store twhetur store tweter store tweetel store
teeters store teaters store teters store teeturs store
teaturs store teturs store teetels store teatels store
tetels store teetors store tetors store teators store
teeers store teetrs store teetes store tweetesr store
tweetres store tweeetrs store tweteers store teweters store
wteeters store tweters store

If you would like to add or correct the content of this site, or if you are interested in supporting the efforts of misspelledsearch.com by placing your product information on these tweeters store pages, please contact mistype@gmail.com for details.