misspelledsearch.com:

scrubber drier

information page

If you cannot find the information you are searching for on this page, we suggest searching Google with the correct spelling "scrubber drier":

Google

This article is about the pollution control device, for other uses, see scrubber (disambiguation).

A scrubber is an industrial pollution control device, usually installed on the exhaust chimneys of large furnaces, but may also be used on any number of other air exhaust systems.

Contents

  • 1 Removal and neutralization
    • 1.1 Wet scrubbing
    • 1.2 Acid neutralization
    • 1.3 Mercury removal
  • 2 Scrubber waste products
  • 3 See also
  • 4 External links

Removal and neutralization

The exhaust gases of combustion may at times contain substances considered harmful to the environment, and it is the job of the scrubber to either remove those substances from the exhaust gas stream, or to neutralize those substances so that they cannot do any harm once emitted into the environment as part of the exhaust gas stream.

Wet scrubbing

A wet scrubber is used to clean air or other gases of various pollutants and dust particles. Wet scrubbing works via the contact of target compounds or particulate matter with the scrubbing solution. Solutions may simply be water (for dust) or complex solutions of reagents that specifically target certain compounds. Removal efficiency of pollutants is improved by increasing residence time in the scrubber or by the increase of surface area of the scrubber solution by the use of sprays, packed towers or a venturi. Wet scrubbers will often significantly increase the proportion of water in waste gases of industrial processes which can be seen in a stack plume.

Acid neutralization

One common form of scrubbing is to neutralize corrosive vaporized acids in the exhaust steam, such as sulfur dioxide that is emitted when coal containing sulfur is burned. These vaporized acids create smog, and can cause acid rain that eats away at sculptures and stonework.

The scrubbing of acids involves powdered lime, which may be mixed with water to form a paste or can also be used dry. The lime is sprayed into the exhaust gas stream inside a reaction chamber. The lime reacts with the acid, neutralizes it, and absorbs it, turning into gypsum which is removed from the exhaust gas stream and can then be used for making other products.

Another method is the use of the dry sorbent scrubber. Limestone pellets (~5mm)are introduced to the top of a tank where they are distributed via gravity and evenly spaced baffles. Acid gas flows countercurrently to the falling limestone and reacts with the surface of the pellet. The pellets fall into a hopper which is collected by a screw and fed into a device which scrapes the outside layer of the reacted limestone off, at which point it is ready to be pushed back up to the top of the tower. This method is not as efficient as lime injection, and also produces limestone dust as a pollutant in the stack exhaust.

Mercury removal

Mercury has no known beneficial uses in nature, but it is a common substance found in coal that must also be removed. However, current methods for mercury removal are not very good, and often only remove up to 75% of the mercury vapor from the exhaust gas stream.

Scrubber waste products

One side effect of scrubbing is that the process only moves the unwanted substance from the exhaust gases into a solid paste or powder form. If there is no useful purpose for this solid waste, it must be either contained or buried to prevent environmental contamination.

Mercury removal results in a waste product that either needs further processing to extract the raw mercury, or must be buried in a special hazardous wastes landfill that prevents the mercury from seeping out into the environment.

See also

  • Electrostatic precipitator
  • Flue gas desulfurization
  • Oil desulfurization

External links

  • Cross section of an air scrubber system – From Microsoft Encarta
  • How is SO2 waste recycled to make wallboard?

This scrubber drier index site has been developed to help wayward users find the information they are looking for, no matter how they are mistakenly spelled or mistyped. This site is designed to help users find scrubber drier information for the following query variants:

scrubber scrubber dreil scrubber dleil scrubber dreir
scrubber dlier scrubber dleir scrubber driel scrubber dliel
scrubber direr scrubber dyrel scrubber diler scrubber dilel
scrubber dyrer scrubber direl scrubber drie scrubber dry
scrubber dly scrubber drei scrubber dlie scrubber dlei
scrubber dier scrubber dyer scrubber diel scrubber dyel
scrubber deir scrubber deil scrubber drler scrubber drire
scrubber rdier scrubber drir scrubber drer scrubber rier
drier scubber drier scrbber drier scrubbr drier
srubber drier scruber drier sclubber drier scluber drier
scrubbel drier scrubel drier sclubbel drier sclubel drier
scrubre drier scrubbre drier scrubebr drier scrbuber drier
scurbber drier srcubber drier csrubber drier

If you would like to add or correct the content of this site, or if you are interested in supporting the efforts of misspelledsearch.com by placing your product information on these scrubber drier pages, please contact mistype@gmail.com for details.

This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "scrubber".