misspelledsearch.com:opteron 1u serverinformation page
If you cannot find the information you are searching for on this page, we suggest searching Google with the correct spelling "opteron 1u server":
The AMD Opteron is the first eighth-generation x86 processor (K8 core), and the first of AMD's AMD64 (x86-64) processors, released April 22, 2003. It is intended to compete in the server market, particularly in the same segment as the Intel Xeon processor. In June 2004, the TOP500 list ranked an Opteron-powered machine at the Dawning 4000A project in China as the tenth fastest supercomputer in the world, dropping to 42nd in November 2005. On the November 2005 list, 10% of the 500 supercomputer installations were AMD64 Opteron-based systems, while 16.2% were Intel EM64T Xeon-based.
Technical descriptionThe two key capabilitiesFeature-wise, Opteron combines two important capabilities in a single processor die:
The first capability is notable because at the time of Opteron's introduction, the only other 64-bit processor architecture marketed with 32-bit x86 compatibility (Intel's Itanium) ran x86 legacy-applications only with significant speed degradation. The second capability, by itself, is less noteworthy, as all major RISC players (SPARC, DEC, HP-PA, IBM Power, MIPS, etc.) have had 64-bit implementations for many years. In combining these two capabilities, however, the Opteron has earned recognition for its ability to economically run the vast installed base of x86 applications, while simultaneously offering an upgrade-path to 64-bit computing. The Opteron processor possesses an integrated DDR SDRAM memory controller. This both reduces the latency penalty for accessing the main RAM and eliminates the need for a separate northbridge chip. Multi-processor featuresIn multi-processor systems (more than one Opteron on a single motherboard), the CPUs communicate using the Direct Connect Architecture over high-speed HyperTransport links. Each CPU can access the main memory of another processor, transparent to the programmer. The Opteron approach to multi-processing is not the same as standard symmetric multiprocessing as instead of having one bank of memory for all CPUs, each CPU has its own memory. The Opteron CPU directly supports up to an 8-way configuration, which can be found in mid-level servers. Enterprise-level servers use additional (and expensive) routing chips to support more than 8 CPUs per box. In a variety of computing benchmarks, the Opteron architecture has demonstrated better multi-processor scaling than the Intel Xeon. In Xeon systems, the total delivered computing power is often less than the sum of the throughputs of the individual CPUs. For example, a Xeon system may execute two simultaneous tasks each at 90% throughput, or four simultaneous tasks each at 80% throughput. Opteron systems suffer much less drop in aggregate throughput, vindicating AMD's architectural decisions. In particular, the Opteron's integrated memory controller allows the CPU to access local-RAM without using the HyperTransport bus. Even for non-local memory access and interprocessor communication, only the initiator and target are involved, keeping bus-utilization to a minimum. In contrast, multiprocessor Xeon system CPUs share a single common bus for both processor-processor and processor-memory communication. As the number of CPUs increases in a Xeon system, contention for the shared bus causes computing efficiency to drop. Multi-core OpteronsIn May of 2005, AMD introduced its first "Multi-Core" Opteron CPU's. At the present time, the term "Multi-Core" at AMD in practice means "dual-core"; the fact that each physical Opteron chip actually contains two separate processor cores. This effectively doubles the compute-power available to each motherboard processor socket. One socket can now deliver the performance of two processors, two sockets can deliver the performance of four processors, and so on. Since motherboard costs go up dramatically as the number of CPU sockets increases, multicore CPU's now allow much higher performing systems to be built with more affordable motherboards. AMD's model number scheme has changed somewhat in light of its new multicore lineup. At the time of its introduction, AMD's fastest multicore Opteron was the model 875, with two cores running at 2.2 GHz each. AMD's fastest single-core Opteron at this time was the model 252, with one core running at 2.6 GHz. For multithreaded applications, the model 875 would be much faster than the model 252, but for single threaded applications the model 252 would perform faster. Low-end: Socket 939AMD has also released Socket 939 Opterons, reducing the cost of motherboards for low-end servers and workstations. The Socket 939 Opterons are identical to San Diego core Athlon 64s, but are run at a much lower clockspeed than the cores are capable of, making them extremely stable. Since this means that they overclock very well, they are in great demand. ModelsEach chip has a three-digit model number, in the form "Opteron xyy". The first digit (the x) specifies the maximum number of CPUs on the target machine:
The last two digits in the model number (the yy) give an indication of the speed of the CPU. Values of yy numbered 60 or higher indicate dual-core models. Opteron (130 nm SOI)
Opteron (90 nm SOI)
See also
External links
This opteron 1u server index site has been developed to help wayward users find the information they are looking for, no matter how they are mistakenly spelled or mistyped. This site is designed to help users find opteron 1u server information for the following query variants:
If you would like to add or correct the content of this site, or if you are interested in supporting the efforts of misspelledsearch.com by placing your product information on these opteron 1u server pages, please contact mistype@gmail.com for details. This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "opteron". |